0,6 / 1 kV 3 × 185 + 1 × 95 LV POWER CABLES
Informations de base
Modèle: YJY
Description du produit
1. NORMES APPLICALBE
Le câble doit être conçu, fabriqué et testé selon les normes internationales comme suit:
Quality Control Standard |
|
ISO 9001 |
Quality Management Systems |
ISO 14001 |
Environmental Management Systems |
Component Material Standard |
|
IEC 60228 |
Conductors of insulated cables |
Cable Standard |
|
IEC 60502-1 |
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) – Part 1:Cables for rated voltages of 1kV(Um=1.2kV) and 3kV(Um=3.6kV) |
IEC 60332-3-24 |
Test for vertical flame spread of vertically-mounted bunched wires or cables – Category C |
2. STRUCTURE DE CABLES POUR CÂBLE 0.6 / 1KV
1)
CU / PVC / PVC / STA / FR-PVC 0.6 / 1 kV 3 × 185 + 1 × 95
Basic Structure |
Nominal Thickness mm |
Nominal Outer Diameter mm |
1.Copper conductor |
/ |
15.3 |
2.XLPE insulation |
1.6 |
18.5 |
3. Filler |
/ |
42.4 |
4. Wrapping tape |
0.2 |
43.0 |
5. PVC Inner sheath |
1.4 |
45.8 |
6. Galvanized steel tape armor |
0.5 |
47.8 |
7. FR-PVC Outer sheath |
2.6 |
53.0 |
3. EXIGENCES DE TEST POUR LES CABLES DE PUISSANCE LV
Les essais par câble doivent être effectués conformément à la norme applicable des câbles d'alimentation 0,6 / 1kV. Les éléments d'essai suivants doivent être effectués conformément aux normes IEC pertinentes.
No. |
Test item |
Routine tests |
|
1 |
measurement of the electrical resistance of conductors |
2 |
Voltage test |
Sample tests |
|
1 |
conductor examination |
2 |
check of dimensions |
3 |
Hot set test for XLPE insulation |
4. DONNÉES D'EMBALLAGE POUR CÂBLES DE PUISSANCE DE 0,6 / 1KV
Les câbles doivent être enroulés sur des tambours en acier et bois. Le marquage indélébile doit être imprimé sur la surface de la bride du tambour conformément aux exigences du client.
Usine et équipementPaquet
Emplacement
Notre honneur
Groupes de Produits : Câble d’alimentation basse tension